How to Connect a Device using Netgear n600 Router WPS Button 

Using the WPS button for the Netgear n600 router setup plays an important role. Netgear n600 router WPS button can be used to connect and configure a device for the existing network. This single button assists in forging internet connection with the Netgear N600 to home network and also to other smart home appliances. There are all the reasons to hop on the train of netgear router n600 wps button, but before that know the essentials and those are the WPS LED indicator behavior and the other one is to know the location of your netgear WPS button, otherwise what you will press. Always know what you are doing.

Know the WPS LED indicator behavior of N600 Netgear router –

• WPS LED off – There is no WPS connection on Netgear N600.
• Blinking/ Pulsating WPS LED – The WPS connection is a work in progress.
• WPS LED is solid on – The WPS connection has been successfully established between the device and N600 router

Where is the wps button on my netgear router?

The WPS button on Netgear N600 is located on the top of the router. You can use the button to forge a proper working network connection with other networking and smart devices. This is the easiest mode to establish a connection – all you need is to click a button.

What are the requirements for N600 Netgear WPS setup?

• Netgear N600 wifi router
• A properly working network and power connection.
• Home router/ modem

Here are explaining the simple steps regarding using the Netgear n600 router WPS button. You are always welcome to contact our router login support team for the issues you are facing with the Netgear n600 router troubleshooting.

Using the Netgear n600 Router WPS Button for Connecting a Device

1. Connect the Netgear N600 to a power socket.
2. Keep the netgear device in the network distance range of the home router/ modem. This eases up the connection and make it smooth.
3. Check for the power LED – it can be blinking in beginning but it’ll turn solid on within seconds, wait till it does. It has to stay solid for the usage.
4. Press the WPS button located at the Netgear n600 router and releases it after few seconds.
5. Search for the WPS button located at the device you want to connect with the network. Within 2 minutes after pressing the WPS button at the n600 router, you have to press the WPS button located at the device end.
6. After pressing the WPS button for router end you will notice that the light will start blinking. This light may blink in two cases that are explained below.
   1. Either the WPS light may blink if the wireless router has successfully generated the SSID and implemented the WPA settings for the router.
   2. Or the WPA security and the SSID name settings are enabled.

In either case you have to note the SSID name and WPA password for accessing the wireless network. The network name and passcode arrive with the purchase of the Netgear N600, either the network SSID label is mentioned on the router or on the box. Check for yourself for further setup or configuration of the device.

Conclusion

These are the very simple steps for accessing the Netgear router n600 router WSP button for connecting the device to the existing network. We hope this instruction must have been helpful to you. In case you still feel the need of assistance, kindly contact router login support team any time you need help regarding Netgear n600 router login, Netgear n600 router troubleshooting or issues that related to Netgear n600 router setup.Router Login Support’s whole existence is just to provide help to you in regard of the networking devices.