0
Richard Naess
Would like to know router setup
0 Subscribers
Submit Answer
0 Answers
To setup your belkin router you need to follow these steps:-
You need to plug in a cable from your existing modem to internet port of your router.
after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
1. Press windows + R key that will open run window for you.
2. Type CMD in the run box.
3. Open Ipconfig and check network statistics.
4. Open your default gateway in any browser.
5. Type your user name and password .
6. that will open a setup wizard for you so follow the steps and you are good to go.
Steps to setup your belkin router-
Check the attachment to see Cable connection .
1.Once you are connected open your browser and type http://192.168.2.1 .
2.Setup wizard will appear.
3.Follow the steps and it will auto detect your internet settings.
4.Once setup is done you can remove etherenet cable from computer.
In order to fix the issue with your router follow the instructions below:
> Login into your Router Dashboard
> See if you have any latest firmware update available if YES do it
> Clone the MAC address of the computer on the router
> Disable the Wireless protected setup (WPS) on the router
> Check he cable between the modem and the router and see if there are any cracks on the cable if yes change the cable
> Reset the router and re-setup the router
> Power cycle the modem and the router means turn off the modem and the router for 10 minutes and then turn them back on again