Leave a reply

3 comments
  • How to install LINKSYS RE6500 range extender OR LINKSYS AC1200 Max Wi-Fi Range Extender
    Before setup, unplug or disconnect any range extenders on the network.
    1. Connect the antennas and power cable. Antennas should be
    upright for best results.
    2. Plug in the range extender midway between your router and the area
    without Wi-Fi. Be sure you have at least 50% of your router’s Wi-Fi signal at
    that point on the device you will use for setup.
    3. Wait for a solid light on the cover of the range extender. It could take up to
    two minutes. On a computer, phone or tablet, connect to the Wi-Fi network
    “Linksys Extender Setup.”
    • Windows 7, Windows 8 and windows 10 will ask you, “Do you want to set up your
    network?” Click the link, “Connect to network without setting it up.”
    4. If setup doesn’t start automatically, open a browser to http://192.168.1.1
    5. You can also try WPS method for easy setup.



    0



  • How to install LINKSYS RE6500 range extender OR LINKSYS AC1200 Max Wi-Fi Range Extender
    Before setup, unplug or disconnect any range extenders on the network.
    1. Connect the antennas and power cable. Antennas should be
    upright for best results.
    2. Plug in the range extender midway between your router and the area
    without Wi-Fi. Be sure you have at least 50% of your router’s Wi-Fi signal at
    that point on the device you will use for setup.
    3. Wait for a solid light on the cover of the range extender. It could take up to
    two minutes. On a computer, phone or tablet, connect to the Wi-Fi network
    “Linksys Extender Setup.”
    • Windows 7, Windows 8 and windows 10 will ask you, “Do you want to set up your
    network?” Click the link, “Connect to network without setting it up.”
    4. If setup doesn’t start automatically, open a browser to http://192.168.1.1
    5. You can also try WPS method for easy setup.



    0



  • TO SETUP YOUR LINKSYS RE 6500 EXTENDER YOU NEED TO FOLLOW THESE STEPS:-
    1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
    2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
    3.PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE ALSO).
    4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
    5.YOU WILL SE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
    6.CONNECT TO THE SAME NETWORK .
    7. IT WILL OPEN A SETUP WIZARD FOR YOU.
    8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
    (IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
    FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024



    0



Written by debedo46
Router Categories