How to connect amped sr10000 extender with the at&t router using the wps method?

• First you need to plugged in the extender to the wall socket make sure its plugged in near to the router under 10 or 15 feet
• Then you need to press the  wps button on the extender then to the router for 3 seconds and then release it
• when the light get solid it means the extender is configured

first of all you need to connect the amped extender to power socket near to router about 10 to 15 fits

now press and hold the wps button on the extender for 3 to 5 sec

then within 1 minute you need to press and hold the WPS key on the router for the 3 to 5 sec .

and wait for the light get stable on the extender ..

then login in the extender setting page to get it secure by using the ip address of the extender

Turn On your amped Extender and make sure that your extender is plugged in to the power with in 15 ft. from the main router(just for the extender setup)

Now press and hold the wps button from the extender for 3 seconds and then release it and with in 2 minutes ,press and hold the wps button from the main router(at&t) for 3 seconds and then release it. and then wait for the lights to get stable on the extender.

You can follow these steps to setup your Amped SR10000 Range Extender:-

>Place the Amped range extender nearby to your AT&T router and power it on for the initial setup.

>Press the WPS button on your extender and hold it down for 3-5 seconds.

>Within the 1-minute press WPS button on AT&T home router.

>Wait for the extender lights get stable and now try to connect any of your wireless devices with the extended network.