How to setup my amped extender with the netgear router?

first plug in the amp extender near to the router,press reset button if you have made any changes on the extender before.Connect any 1 device with amped wifi network.Now open 192.168.1.240 on the browser.Press the scan button so it can detect all devices nearby.Then select the network from the list and enter the wifi password for your home network.you will see the option to change extender network name and password if you want.Now save the settings and restart the extender.Once the light is solid on the extender then you can connect the devices it's set up.

To setup amped range extender with Netgear router follow these steps:-
>Plugin the amped range extender near to your Netgear router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
>Connect any one of your wireless or wired devices with the amped wireless network.
>Open any browser and in the address bar type http://192.168.1.240 or http://setup.ampedwireless.com
>Now you will see the SCAN button on the page, click on it and after that it will scan the wireless networks nearby to it.
>From the list select network that you want to extend and then enter the password for your home wifi.
>In the next step if you want you can change the name of extended network and password of your choice that you want for it or you can also clone the settings over there.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.

• Turn ON your Amped Extender
• Connect your smartphone or computer with the Amped Extender’s network
• open your browser and type this address:- 192.168.1.240
• it will take you to the setup page of the extender and then click on the Scan Option
• Now it will search for available wifi networks ,select your Netgear Router’s wifi network and then Hit Next
• Now it will ask for the Home security key which your wifi password your current wifi network so enter that same password and hit next
• Now Enter the information for your Extended network or you can click on the clone settings option also and then hit next
• After that it will save the settings and will take some time ,once the settings are saved then you can connect your wireless devices with the amped extender's network

Steps to configure amped extender with the netgear router:-

• Plugin the amped range extender near to your Netgear router for the initial setup.
  *If you made any change on the extender before, then reset the extender by pressing reset button for at least 20 seconds.
• Connect any of your wireless device with amped wireless network.
• Open any browser and in the address bar type 192.168.1.240 or http://setup.ampedwireless.com
• Now you will see the SCAN button on the page, click on it and after that it will scan the wireless networks nearby to it.
• From the list select network that you want to extend and then enter password for the same.
• In the next step if you want you can change the name of extended network and password of your choice that you want for it.
• Now save the settings and range extender will reboot after saving the settings.
• Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.