Leave a reply

2 comments
  • TO CONNECT YOUR LINKSYS RE6500 EXTENDER YOU NEED TO FOLLOW THESE STEPS
    1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
    2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
    3.PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE ALSO).
    4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
    5.YOU WILL SE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
    6.CONNECT TO THE SAME NETWORK .
    7. IT WILL OPEN A SETUP WIZARD FOR YOU.
    8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
    (IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
    FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024.



    0



  • Steps to reconfigure your linksys RE-6500 Range extender-

    1.Plug your extender in the wall.
    2.Wait for power LED to be solid.
    3.Grab a paper clip and look for reset button on extender.
    4.Press and hold the reset button for 30 seconds then release it.
    5.Wait until you got power LED solid green or White.
    Note-Some Linksys extender blinks amber before You setup .Dont worry if you see blinking amber.
    6.Now just press WPS on router for 3 seconds then on extender for 5 seconds.
    7.You will see the LED got solid once the connection is completed .
    8.Open browser on any device but make sure you connect on linksys extender network first .
    9. Type http://extender.linksys.com Setup page will appear to show you your default settings.
    10.You can change any settings on that page .



    0



Written by Larry
Router Categories