Leave a reply

5 comments
  • To set up your TL-WA850RE extender –
    1.Plug in the extender in the wall outlet.
    2.Then on your computer or wifi enabled device you can connect on tp link extender ssid.
    3.Once you have connected the device to the extender, open the browser and open this website 192.168.1.254.
    4.Once you have opened the extender page use admin for the username and admin for the password.
    5.Then just follow the simple setup wizard and select your existing network and enter the password.
    6.Wait for two minutes for the setup to take place.
    7.Last step is to plug in the extender wherever you want in the house but make sure its only 30-40 feets away from your router.
    8.If you are still facing problems with the setup,you can call us at 1-800-603-4024
    Thank you



    0



  • TO SETUP YOUR TPLINK EXTENDER YOU NEED TO FOLLOW THESE STEPS:-

    1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
    2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
    3.PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE ALSO).
    4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
    5.YOU WILL SE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
    6.CONNECT TO THE SAME NETWORK .
    7. IT WILL OPEN A SETUP WIZARD FOR YOU.
    8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
    (IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
    FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024.



    0



  • CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
    2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
    3.PRESS WPS BUTTON ON YOUR ROUTER AND YOU WILL SEE LIGHTS STARTS BLINKING ON YOUR EXTENDER.
    4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK ONCE THE LIGHT WILL BE SOLID.
    5.NOW ENTER THE ADDRESS FOR YOUR EXTENDER SET UP.
    6.LOGIN WITH DEFAULT CREDENTIALS THERE.
    7. IT WILL OPEN A SETUP WIZARD FOR YOU.
    8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
    (IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
    FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024.



    0



  • TPlink-TL-WA850RE extender Setup –
    Plug your extender into power socket . Avoid surge protector /Extensions !
    You need to reset the extender so hold the reset button on extender for 25 seconds and release it.
    1-Connect your device to extender’s network .
    2-Open your Browser.
    3-Type http://tplinkrepeater.net or 192.168.0.250 / 192.168.0.254 in address bar.
    4-You need to login now with default login:-Username-admin /Password-admin.
    5-Setup wizard will guide you through setup.



    0



  • In order to configure the range extender you need to follow the instructions below:
    > plug in your extender near to the router for the initial setup within 10 feets
    > Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
    > Once you see the light stopped flashing on the extender it means the extender is setup now
    Step 2
    > Connect your computer wireless to the extended network
    > pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
    > You will get through a login window default username: admin and the Password : admin
    > click on quick setup and Continue , Follow the instructions to complete the setup



    0



Written by Alpha2017
Router Categories