How to setup amped REA20 with my optimum router?

To setup amped REA20 with my optimum router,first plug in the extender to the power.Now connect any wireless device with the extender's network.Open 192.168.1.240 on the browser.Once you see the setup page  , you need to click on scan.Once you see the list of available networks , select the one you want to extend.Also select the band either 2.4 GHz or 5.0 GHz.Next you need to enter the wifi credentials.Once you see your extended network name and password , you can change it and then click on save.Now setup is completed.

To setup your amped extender with optimum router you need to Follow these steps :

1. At first you need the password of Optimum router that help you in setting up your extender.
   2. Plugged in your extender nearby your router and then wait for 3 to 5 minutes .
   Press the WPS button on your Amped Extender for 5 seconds and within 1 minute press the WPS button on your Optimum router for 5 seconds and wait for 5 minutes .
   When you see all solid light on your extender then go to your computer or mobile phone and then go to the wifi over there. Where you see optimum_Re network or Amped extender in the list. Please connect your you devices with this network and put you Optimum router password ( If it ask for the password) . once you connected with that network then check internet is working fine, if it is then your extender is configured properly. Now if you want you will able to move your extender where ever you wanted.

1. Turn On your Amped Extender
2. Connect your Computer or Smartphone with the Extender’s network
3. open your browser and type this address:- 192.168.1.240
4. It will take you to the Amped setup page, click on Scan
5. Now it will scan for the available networks , select your Optimum Router’s 2.4G network and 5G network and then click on Next
6. Now enter your wifi password for both the bands and click on Next
7.  then it will show you your Extended network names and password(you can also change that information) and then click on save
8. Setup Complete.