How to do the setup of Arlo VMS3230 cameras?

>Turn On your arlo base station and connect an ethernet cable between your base station and the router
>Now on your computer ,open your browser and type this address:- https://arlo.netgear.com
> Sign in with the arlo account and if you don't have any account then click on new to arlo and follow the steps.
>click on add a device
> select your base station and then it will search for your base station
> once its shows you your device then give a name to your device and hit next.
> once your base station is configured then sync all of your cameras with the base station(make sure your cameras are within 5 ft. from the base station.)
and to sync your cameras , for that first press and hold the sync button on the base station for 3 seconds and then on camera for 2 seconds and wait for the blue light to blinks fast on the camera and after that once the light goes off on the camera it means camera is synchronized with the base station.
> Do this same thing with all the cameras
> and once your cameras are synchronized, then you can refresh the same page and then it is going to show all your cameras.

> after that you can check your camera's live feed.

Follow the below-mentioned steps to do the setup of your Arlo VMS3230 cameras:

1. Power on your BaseStation and connect one ethernet cable between the base station and your home router.
2. Once you will see that Power and Internet light is green then you need to grab your laptop or tablet and connect it to the same router's network.
3. Open any latest web browser and at the long address bar type http://arlo.netgear.com
4. Click on New to Arlo? and after that follow the on-screen instructions to complete the setup.

*If you face any single issue in between the setup process or you are not able to see cameras online then feel free to reply us back so that we can help you further.

• First you have to Connect the base station to your router using an Ethernet cable.
• Create an Arlo account in https://arlo.netgear.com/#/login, From there click or tap New System Setup and follow the on screen prompts.

Steps to sync the cameras:-

• Bring the camera within 1 to 3 feet of the base station.
• Press the Sync button on the base station for about two seconds and then
  release the button.
• . Wait for the sync status LED on the base station to light green.
• Press the Sync button on top of the camera for about two seconds and then
  release the button. The blue LED blinks rapidly to confirm sync.
• Repeat for each camera.