how to setup my netgear wn2500rp extender?

3 comments

• Setting your Netgear WN2500 RP Range extender.
  1.Plug your extender in the wall .
  2.Connect a Ethernet cable from extender to your computer.
  3.Once your connected open your browser and type 192.168.1.250 / 192.168.1.254 .
  4.Setup wizard will appear .
  5.Create an account first.
  6.Select range extender as your mode .
  7.Follow the steps to complete the setup.
  8.When setup is complete simply disconnect the ethernet cable from extender and computer .

  
  
  

  0

  
  
  

  Reply

• TO CONNECT YOUR NETGEAR WN2500 RP EXTENDER YOU NEED TO FOLLOW THESE STEPS
  1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
  2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
  3.PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE ALSO).
  4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
  5.YOU WILL SE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
  6.CONNECT TO THE SAME NETWORK .
  7. IT WILL OPEN A SETUP WIZARD FOR YOU.
  8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
  (IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
  FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024.

  
  
  

  0

  
  
  

  Reply

• Use the following steps to set up the WN2500RP –

  1.First step will be to connect an ethernet cable from the extender to the computer while it is plugged into the wall outlet.

  2.now on your computer open your browser and type 192.168.1.250/192.168.1.254 .

  3.now you will see a setup page ,select there the name of your router and enter the password.
  4.after 1 minute it will be connected and ready to use.

  
  
  

  0

  
  
  

  Reply