Leave a reply

  • Steps to Reset Netgear WNDR 4300 –

    1.First you need to unplug all the cables from your router.
    2.Connect only power to your router.
    3.Grab a paper clip and look for reset pinhole on router.
    4.Hold the reset button for 30 seconds and release it.
    5.Wait until your see power LED solid .It will take around 1 minute to reboot properly.
    6.Now your router is on factory settings.


  • unplug all the cables and hold the paperclip in the reset hole of the router for 30 seconds,after the router is resetted follow these steps to configure it.

    1.Connect a Ethernet cable from modem to your router’s WAN port.
    2.Connect another cable from router to computer .
    3.Now open your browser and type in the address bar http://routerlogin.net .
    4.Select ‘Help me Choose’ and follow the instructions on the screen.
    5.Once your setup is completed remove the ethernet from computer.


  • To reset your netgear wndr 4300 you need to follow these steps:-
    1. unplug all cables except power cable it should be connected to router.
    2. grab a paper clip for you.
    3. now look for the reset hole of your router.
    4. it can be underneath or at the back of your router.
    5. insert the paperclip and hold it for atleast 30-60 seconds.
    6. you will notice change in pattern of lights on the front panel of router.
    7. wait for 1 minute atleast as it will reboot meanwhile .
    your router is successfully reseted to factory default settings.
    for any help feel free to call us back on 1-800-603-4024.


Written by flgators
Router Categories