How to setup belkin n300 range extender with Sky Broadband router?

To setup you belkin extender with Sky router you need to Follow these steps :

At first you need the password of Sky router that help you in setting up your extender.
Plugged in your extender nearby your router and then wait for 3 to 5 minutes .
Press the WPS button on your Belkin Extender for 5 seconds and within 1 minute press the WPS button on your Sky router for 5 seconds and wait for 5 minutes .
When you see all solid light on your extender then go to your computer or mobile phone and then go to the wifi over there. Where you see Sky_Ext network or belkin extender in the list. Please connect your you devices with this network and put you Sky router password ( If it ask for the password) . once you connected with that network then check internet is working fine, if it is then your extender is configured properly. Now if you want you will able to move your extender where ever you wanted.

There are some step for successfully configure your belkin with sky router , follow these steps and you goo to go.

1. At first , please plugged in your belkin nearby your router. Make sure it is plugged in directly with wall socket .
2. Then go to your wifi on your computer or mobile and then Connnect your devices with belkin and open any browser on it ..
3.  On the top of browser please type 192.168.2.1 or 192.168.206.1 and you will reach at setup page . Complete the setting and you good to go.

You can setup your belkin extender using the WPS button.

Note(make sure that the extender is kept closer to the router under 5 feet)

1. Press and hold the WPS button on the belkin Extender for 5 seconds.
2. Within 2 minutes, press the WPS button on your wireless router.And wait for at least 2 minutes while the extender connects to your existing wireless network.If successful, the WPS LED on your Extender turns solid green.