How to configure Wicommfi Extender with Linksys WRT3200ACM?
To setup Wicommfi CF-WR750AC range extender follow these steps:-
- Plug-in the Wicommfi range extender into the wall socket near to your home router for the initial setup.
*If you made any change on the extender before or forgot the password, then reset the extender by pressing reset button for at least 30 seconds (make sure extender should be plugged directly into the wall socket).
- Once the lights get stable or after 60 seconds connect any of your wireless devices with Wicommfi extender's wireless network.
>Open any browser and in the address bar type http://192.168.10.1
>In the login page type username (admin) and password (admin)
>Now you will see the extender in the page, follow the instructions to setup the range extender.
>If you want you can change the name of extended network of your choice that you want for it.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid or after 30 seconds connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.
- Pull Up available Wifi list on your computer and check that is the Wicommfi is present in the list. Connect your computer with Wicommfi and them go to any browser on your computer . ( Preferred Browser is Google Chrome).
- On the address bar of your browser type 192.168.10.1 and hit Enter. Your will see username and password over there , please put the default password that is “admin” and “admin” for both username and password.
- Now you will see the login page of your extender, so please choose how you want to use your extender ( as as Access point , Repeater, Router) and the follow the up coming steps to complete the configuration. ( Note that , if you want to make it as a repeater please put the same password as your main router so that you will not get any problem in the end.)
- Now once your Extender is Configured , plugged in where ever you wanted and connect your devices with extender and it will work fine for you.
It is very easy and simple to configure Wicommfi Extender with these following steps that are written below:-
At first please plugged in your extender nearby router ( not more than 7 feet away, you will see that all the light turn on. Then you need a help of computer or smartphone to configure your extender.
- Pull Up available Wifi list on your computer and check that is the Wicommfi is present in the list. Connect your computer with Wicommfi and them go to any browser on your computer . ( Preferred Browser is Google Chrome).
- On the address bar of your browser type 192.168.10.1 and hit Enter. Your will see username and password over there , please put the default password that is "admin" and "admin" for both username and password.
- Now you will see the login page of your extender, so please choose how you want to use your extender ( as as Access point , Repeater, Router) and the follow the up coming steps to complete the configuration. ( Note that , if you want to make it as a repeater please put the same password as your main router so that you will not get any problem in the end.)
- Now once your Extender is Configured , plugged in where ever you wanted and connect your devices with extender and it will work fine for you.