How to setup linksys re9000 with spectrum router?
In order to do that first you need to plug in your extender near by the router under 10 feet and then connect any of your device with the extender network then open any browser and type at the very top of the screen ip address that is 192.168.1.1 and hit enter now you will see the login page of the extender once you logged in then click on the start setup After that it is going to scan for the wireless networks and then select your spectrum router’s wifi network and after that enter the same password that you were using for your spectrum router’s wifi network and then hit next And then create your extended network then click on save the settings once it is setup you can place it any where in the home.
First you need to plugged your extender into wall socket near to your home router for the initial setup.
If you want any changes for your extender you need to press the reset button for the 30 second.
Now you need to open any browser on your computer and type on the top of the screen https://extender.linksys.com or https://192.168.1.1
Now you will see the setup page and follow the instruction on the extender to set up the extender.
Now save the settings and range extender will reboot after save the setting
When extender light get solid you can plugged your extender where you want
- Turn On your Linksys extender
- Connect your computer or smartphone with the extender’s wifi network
- Now open your web browser and type this address:- 192.168.1.1
- It will take you to the linksys extender’s setup page and from there click on Start Setup
- After that it is going to scan for the wireless networks and then select your spectrum router’s wifi network and after that enter the same password that you were using for your spectrum router’s wifi network and then hit next
- And then create your extended network
- save the settings
- Turn On your Linksys extender
- Connect your computer or smartphone with the extender's wifi network
- Now open your web browser and type this address:- 192.168.1.1
- It will take you to the linksys extender's setup page and from there click on Start Setup
- After that it is going to scan for the wireless networks and then select your spectrum router's wifi network and after that enter the same password that you were using for your spectrum router's wifi network and then hit next
- And then create your extended network
- save the settings
- once the setup is complete then you can connect your wireless devices with the extended network.
lease follow these steps to setup your Linksys RE6400 Range Extender:-
1. Place the Linksys range extender nearby to your home router and power it on for the initial setup.( Make Sure it is plugged in with wall socket).
2.Press the WPS button on your extender and hold it down for 3-5 seconds ,Within 1 minute press WPS button on your home router.
3 Wait for some time . if the extender lights get stable then try to connect any of your wireless devices with the extended network by using router password.
Then you good to go.
To setup Linksys RE9000 range extender follow these steps:-
>Plug in the range extender into the wall socket near to your home router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
>Connect any of your wireless devices with Linksys extender wireless network.
>Open any browser and in the address bar type http://192.168.1.1 or http://extender.linksys.com
>Now you will see the setup wizard in the page, follow the instructions to setup the range extender.
>If you want you can change the name of extended network and password of your choice that you want for it.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.