0
spatte1231
My browsers are not working and some of the videos ?
0 Subscribers
Submit Answer
0 Answers
Steps which you can do Fix your Repeater issues-
1.Try power cycling your booster , Router and modem.
2.Try changing the power socket .If using surge protector Plug in direct socket.
3 Make sure extender is in Max 30 feet range of your router.
4.Try resetting your extender and setup it again.
5.You can also change the channels on your main router and then setup extender.(Use channel-11)
-For browser I will suggest you to reset the the browser just go in control panel>internet option>advance tab>reset.
-Try updating flash plugins.
-Use a different browser.(Google Chrome)
IN THIS CASE PLEASE RESET THE EXTENDER AND SET IT UP USING THIS GUIDE.
•First you will need to place the tp-link extender near to your router and then plug the power to WiFi extender.
•Press the WPS button located at the tp-link extender and do the same on your router, within two minutes, tp-link extender will connect itself with the existing network.
•Type http://tplinkrepeater.net or 192.168.0.250 in address bar ,if the setup is not working.
•You will notice that the LED status will be solid green.
Once your tp-link extender is connected with the existing network you can place the WiFi extender where the dead zones are at your location.
In order to configure the range extender you need to follow the instructions below:
> plug in your extender near to the router for the initial setup within 10 feets
> Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
> Once you see the light stopped flashing on the extender it means the extender is setup now
Step 2
> Connect your computer wireless to the extended network
> pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
> You will get through a login window default username: admin and the Password : admin
> click on quick setup and Continue , Follow the instructions to complete the setup