Leave a reply

4 comments
  • Steps To setup Belkin N300 range extender –

    1.Plug Your extender in the wall socket.
    2.Use your wireless device To connect to belkin network.
    3.Once you are connected to Belkin extender Open your browser.
    4.Type “http://Belkin.range”
    5.Setup screen will appear just follow the steps to configure the extender.

  • 1.Plug in your extender in the wall outlet.
    2.Then connect your router on the wifi of your extender.
    3.Now open the browser and type this address http://Belkin.range.
    4.Now you will see the setup screen,so follow the steps and youll be good to go.

  • TO SETUP YOUR BELKIN EXTENDER YOU NEED TO FOLLOW THESE STEPS:-

    1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
    2. YOU NEED TO CONNECT ANY WIRELESS DEVICE TO YOUR BELKIN EXTENDER NETWORK.
    3. AFTER CONNECTING YOU NEED TO OPEN A BROWSER.
    4. NOW OPEN http://Belkin.range .
    5. IT WILL OPEN A SETUP WIZARD FOR YOU.
    6. FOLLOW THE ONSCREEN INSTRUCTIONS AND YOU ARE GOOD TO GO NOW.
    FOR ANY PROBLEM CALL US ON 1-800-603-4024.

  • In order to configure the range extender you need to follow the instructions below:
    > plug in your extender near to the router for the initial setup within 10 feets
    > Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
    > Once you see the light stopped flashing on the extender it means the extender is setup now
    Step 2
    > Connect your computer wireless to the extended network
    > pull up browser and at the very top type in 192.168.2.1
    > You will get through a login window default username: admin and the Password : admin
    > click on quick setup and Continue , Follow the instructions to complete the setup

Written by fred
Router Categories