myย belkin n300 unit is blinking amber and blue
This means your extender is not configured properly with the router network. To connect belkin extender to the network connect belkinย extender to the wall socket and press reset key for 30 seconds. Make sure it is close to the modem(maximum distance not more then 10 feet) Go to your computer or phone and open browser and type 192.168.206.1 in the top url bar. It will ask for your login information (default username and password is admin for both). Then it will open setup page. Just follow the instructions and your extender will get connect to the internet.
If your belkin extender is showing blinking amber light, it means that extender is not configured
In order to configure the belkin extender ,we need to follow some steps:-
> Turn On your belkin extender
> connect your computer or smartphone with the belkin extender's network
> Now open your web browser and type this address:- https://belkin.range or 192.168.206.1
> It will take you to the belkin page and from there click on Start setup option
> then follow the instructions and complete the setup process
> once your extender is configured then you can connect your wireless devices with the extender's network.
or
we can also configure our extender with the wps option
and for that we need to press and hold the wps button for atleast 3 seconds and with in 2 minutes press and hold the wps button from your main router for atleast 3 seconds and wait for the lights to get stable on the extender.
In this case, you need to follow below-mentioned steps-
>first of all if you made any changes on it you need to reset your Belkin Range Extender by pressing the Reset button for 45 seconds(while it's powered on).
>Once the Extender lights stop flashing then you can easily reconfigure it simply by performing WPS Method on it.
> To do WPS process you need to press the WPS button of your home router for 3 seconds and then within 1 minute, you need to press the same WPS button of your Belkin Extender for 3 seconds.
> Once you find that the lights of the extender are solid/stable, you can connect to its network using the router's WiFi password with any of your wireless devices and then try to go online so that you come to know its working fine.
*If you still face any kind of trouble with your Router or Extender do write us back so that we can help you accordingly.
If your belkin extender is showing blinking amber light, it means that extender is not configured
In order to configure the belkin extender ,we need to follow some steps:-
> Turn On your belkin extender
> connect your computer or smartphone with the belkin extender's network
> Now open your web browser and type this address:- https://belkin.range or 192.168.206.1
> It will take you to the belkin page and from there click on Start setup option
> then follow the instructions and complete the setup process
> once your extender is configured then you can connect your wireless devices with the extender's network.
or
we can also configure our extender with the wps option
and for that we need to press and hold the wps button for atleast 3 seconds and with in 2 minutes press and hold the wps button from your main router for atleast 3 seconds and wait for the lights to get stable on the extender.