I need to change my Extender info
amped mdl SR1000
If your extender is already configured with the existing network then check the IP address for the amped extender which is provided by your main router and to get the IP address of the amped extender.
connect your computer with the router's network
open the browser and then login into the router's settings by typing its default IP address, depends upon your router's model no.
enter your login information
check the connected devices or DHCP client list and check the IP address for the amped extender
then open that IP address in the browser and after that it will take you to the dashboard of the amped extender
from there you can change the information for your extender.
To connect amped to the network connect amped to the wall socket and press reset key for 30 seconds. Make sure it is close to the modem(maximum distance not more then 10 feet) Go to your computer or phone and open browser and type 192.168.50.1 in the top url bar. It will ask for your login information (default username and password is admin for both). Then it will open setup page. From there you can change the information for your extender.
If your extender is already configured with the existing network then check the ip address for the amped extender which is provided by your main router.
> and to get the ip address of the amped extender
> first of all connect your computer with the router's network
> then open the browser and then login into the router's settings by typing its default ip address(for example: 192.168.1.1 or 192.168.0.1 or 10.0.0.1 or 192.168.50.1), depends upon your router's model no.
> enter your login information
> then check the connected devices or dhcp client list and check the ip address for the amped extender
> and then open that ip address in the browser and after that it will take you to the dashboard of the amped extender
> and from there you can change the information for your extender.
To setup amped range extender follow these steps:-
>Plugin the amped range extender near to your home router for the initial setup.
*If you made any change on the extender or changed your router, then reset the extender by pressing reset button for at least 30 seconds.
>Once power light on extender gets stable connect any of your wireless device with amped wireless network.
>Open any browser and in the address bar type 192.168.1.240 or http://setup.ampedwireless.com
>Now you will see the SCAN button on the page, click on it and after that it will scan the wireless networks nearby to it.
>From the list select network that you want to extend and then enter the password for same.
>In the next step if you want you can change the name of extended network and password of your choice that you want for it.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.
If your extender is already configured with the existing network then check the ip address for the amped extender which is provided by your main router.
> and to get the ip address of the amped extender
> first of all connect your computer with the router's network
> then open the browser and then login into the router's settings by typing its default ip address(for example: 192.168.1.1 or 192.168.0.1 or 10.0.0.1 or 192.168.50.1), depends upon your router's model no.
> enter your login information
> then check the connected devices or dhcp client list and check the ip address for the amped extender
> and then open that ip address in the browser and after that it will take you to the dashboard of the amped extender
> and from there you can change the information for your extender.