how to setup my linksys re 6400 range extender with WPS

Plug in the extender to the wall socket and keep it close to the modem. Press the WPS key on the extender. Then within two minutes press the WPS key on the router too. You will see green solid light on the extender this means your extender is configured. You can take now your extender wherever you want to set it up and you can easily connect your wireless device there.

You can setup your linksys re 6400 extender using the WPS button.

Note(make sure that the extender is kept closer to the router under 5 feet)

1. Press and hold the WPS button on the linksys Extender for 5 seconds.
2. Within 2 minutes, press the WPS button on your wireless router.And wait for at least 2 minutes while the extender connects to your existing wireless network.If successful, the WPS LED on your Extender turns solid green.
3. Unplug your device and keep it in between router and dead zone.
4.  Connect your WiFi devices with the WiFi extended network (.ext) you created with the help of extender.