Leave a reply

3 comments
  • If your extender is already configured with any existing network then first you need to reset your extender and for that you have to press and hold the reset button from the extender for at least 30 seconds.
    And once is extender is reset successfully then you need to follow these steps:-
    > Connect your computer with the extender's network
    > open your browser and type this address:- 192.168.1.1 or https://extender.linksys.com
    > Now click on start button
    > it will scan for the available wifi network
    > select your new network with which you want you to configure your extender
    > Enter your wifi password
    > and hit next
    > now it will save the settings
    > once its get configured then you can connect your wireless devices with the network.



    0



  • steps you need to follow in order to configure your router:

    1. Make sure the extender is on

    2. connect a cable from the extender to the computer or connect your computer wirelessly to the default SSID of your linksys extender

    3. Pull up a browser and at the top on the address bar type in https://extender.linksys.com or 192.168.1.1 and hit enter

    4. You will directed to the Linksys extender setup screen, all you need is now follow the instructions and comoplete the setup.



    0



  • To setup Linksys range extender follow these steps:-
    >Plugin the range extender into the wall socket near to your home router for the initial setup.
    *If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
    >Connect any of your wireless device with Linksys extender wireless network.
    >Open any browser and in the address bar type 192.168.1.1 or http://extender.linksys.com
    >Now you will see the setup wizard in the page, on the same page you will see manual setup option, you need to click on that and it will redirect you to the login screen of Linksys extender.
    >By typing admin in the password box you are able to login into the extender dashboard.
    >Click on site survey, over there you are able to connect your extender with the existing network.
    >If you want you can change the name of extended network and password of your choice that you want for it.
    >Now save the settings and range extender will reboot after saving the settings.
    >Once extender light gets solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.



    0



Written by Bruce J
Router Categories