How to configure linksys extender through router?





Some steps you need to follow :
* Launch your web browser.
* Enter “192.168.1.1” in the Address bar.(normally you are automatically redirected to the setup page)
* Leave the User name blank and enter “admin” in the Password field.
* Click on Wireless > Basic Wireless Settings.
* On the Configuration View section, click on the Manual radio button then enter your router’s Wi-Fi or Network Name (SSID) in the field provided.
* On the Wireless Security section, select the security mode that your router is using. ( WPA/WPA2)
* Enter your password in passphrase which you want to use .
* Save settings
YOU ARE GOOD TO GO

In order to set up the Range Extender you would need to follow the following steps:
Step 1
> First connect your computer wireless or wired to the range extender
> login to extender.linksys.com or type 192.168.1.1
> you will be directed to the setup wizard the default password is 'admin'.
> initiate the setup.
Step 2
> Press the WPS button on the router first for 3 seconds and then on the extender for 3 seconds once the light on the extender stops blinking the setup is complete.

Step 1:please make sure computer is connected with internet wifi or with cable
Launch your web browser.
Step 2:
Enter “192.168.1.1” in the Address bar.
NOTE: If the range extender is not yet configured, it will automatically redirect to the web-based setup page if you try to access any website.
Step 3:
Leave the User name blank and enter “admin” in the Password field.
NOTE: The Linksys RE1000 is used here as an example.
Step 4:
Click on Wireless > Basic Wireless Settings.
Step 5:
On the Configuration View section, click on the Manual radio button then enter your router’s Wi-Fi or Network Name (SSID) in the field provided.
Step 6:
On the Wireless Security section, select the security mode that your router is using.
Step 7:
After selecting the security mode, enter the passphrase or Wi-Fi password that your router is using in the fields provided.
NOTE: The Passphrase must consist of at least eight characters and is case-sensitive.
NOTE: For optimum Wireless-N performance, it is recommended to use WPA/WPA2 wireless security on your router and range extender.
Step 8:
Click Save Settings.
Your range extender should now be synchronized with your router.
Some steps you need to follow :
* Launch your web browser.
* Enter “192.168.1.1” in the Address bar.(normally you are automatically redirected to the setup page)
* Leave the User name blank and enter “admin” in the Password field.
* Click on Wireless > Basic Wireless Settings.
* On the Configuration View section, click on the Manual radio button then enter your router’s Wi-Fi or Network Name (SSID) in the field provided.
* On the Wireless Security section, select the security mode that your router is using. ( WPA/WPA2)
* Enter your password in passphrase which you want to use .
* Save settings
YOU ARE GOOD TO GO