Leave a reply

2 comments
  • >Turn On your linksys router and connect an ethernet cable between your router and modem(cable should be connected to the internet slot of your linksys router)
    >connect your computer with the routers's wifi network or we can also use an ethernet cable
    >open your browser and type this address:- https://linksyssmartwifi.com or 192.168.1.1
    >now follow the instructions and complete the setup
    >once the setup is complete ,router is ready to use.



    0



  • TO SET UP YOUR LINKSYS ROUTER YOU NEED TO FOLLOW THESE STEPS:
    1. PLUG IN YOUR ROUTER TO A WALL SOCKET.
    2. CONNECT AN ETHERNET CABLE FROM YOUR MODEM TO INTERNET PORT OF YOUR ROUTER.
    3. CONNECT ANOTHER ETHERNET CABLE FROM PORT NO-4 OF YOUR ROUTER TO YOUR COMPUTER.
    4. OPEN RUN WINDOW AND TYPE CMD.
    5. THEN ON CMD WINDOW TYPE IPCONFIG IT WILL SHOW YOU NETWORK STATISTICS.
    6. THEN OPEN A BROWSER AND TYPE DEFAULT GATEWAY IN ADDRESS BAR FOR LINKSYS ROUTER HIT ENTERS.
    7. WHEN YOU WILL HIT ENTER KEY THERE WILL BE A PROMPT ASKING USERNAME AND PASSWORD.
    8. DEFAULT USERNAME-admin PASSWORD-password for LINKSYS ROUTER.
    9. IT WILL OPEN A SETUP WIZARD YOU JUST NEED TO FOLLOW STEPS AND YOU WILL BE CONNECTED TO NETWORK.
    IF STILL PROBLEM PERSISTS YOU CAN RESET YOUR DEVICE.



    0



Written by Jim H
Router Categories