HOW TO SETUP MY DLINK DIR615?
plug in the extender into the wall socket and then plug the ethernet cable coming from the modem into the dlink and then with the other cable make a connection between a computer or laptop and the dlink
now open the browser and type the IP address into the long address bar of your browser, it will take you to the setup page
complete the instructions and then set up the wireless password and save the settings.
now your dlink is ready to work
First of all, connect your Dlink router with the modem using an ethernet cable and make sure cable is connected in the internet slot at the backside of the dlink router.
> turn On your dlink router
> connect your computer with the router's network
> open your browser and type this address:- 192.168.0.1
> Now if it's asking for the login information then leave the admin password field blank
> then follow the instructions and complete the setup process
> once your router is configured then you can connect your wireless devices with the router's network
TO SETUP YOUR D LINK DIR 615 YOU NEED TO FOLLOW THESE STEPS:
1.PLUG IN YOUR D LINK DIR 615 DIRECTLY INTO WALL SOCKET.(DO NOT USE EXTENSIONS/SURGE PROTECTOR)
2.PLUG IN A ETHERNET CABLE FROM YOUR MODEM TO YOUR ROUTER(INTERNET PORT).
3.CONNECT A CABLE FROM PORT NUMBER 4 OF YOUR ROUTER TO YOUR COMPUTER.
4.PRESS WINDOWS KEY + R,OPEN CMD .
5.CHECK YOUR NETWORK STATISTICS.
6. OPEN YOUR DEFAULT GATEWAY IN ANY BROWSER.
7. IT WILL ASK FOR YOUR PASSWORD LEAVE IT BLANK.
8. FOLLOW ALL THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
IN CASE PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE ONCE.
Setup your DLink router –
Power up your router.Connect your router from internet port to the modem lan port with ethernet cable (cat5) .Then connect another ethernet cable from dlink ethernet port to your computer .
Press windows key+R for run command and then type cmd hit ok.
In cmd screen (Black screen) type ipconfig >get the default gateway.
Type that default gateway in the address bar of your browser .
Login screen will appear then leave password blank and enter .
You will see setup wizard .
IN ORDER TO SETUP YOUR D-LINK DIR-615 YOU NEED TO FOLLOW THESE STEPS:
1.PLUG IN YOUR D-LINK DIR-615 DIRECTLY INTO WALL SOCKET.(DO NOT USE EXTENSIONS/SURGE PROTECTOR)
2.PLUG IN A ETHERNET CABLE FROM YOUR MODEM TO YOUR ROUTER(INTERNET PORT).
3.CONNECT A CABLE FROM PORT NUMBER 4 OF YOUR ROUTER TO YOUR COMPUTER.
4.PRESS WINDOWS KEY + R,OPEN CMD .
5.CHECK YOUR NETWORK STATISTICS.
6. OPEN YOUR DEFAULT GATEWAY IN ANY BROWSER.
7. IT WILL ASK FOR YOUR PASSWORD LEAVE IT BLANK.
8. FOLLOW ALL THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
IN CASE PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE ONCE.