Leave a reply

  • In this case, you need to follow below-mentioned steps-
    >first of all if you made any changes on it then you need to reset your Belkin Range Extender by pressing the Reset button for 20 seconds(while it's powered on).
    >Once the Extender lights stop flashing then you can easily reconfigure it simply by performing WPS Method on it.
    > To do WPS process you need to press the WPS button of your Optimum router for 3 seconds and then within 1 minute, you need to press the same WPS button of your Belkin Extender for 2 seconds.
    > Once you find that the lights of the extender are solid/stable, you can connect to its network using the router's WiFi password with any of your wireless devices and then try to go online so that you come to know its working fine.
    *If you still face any kind of trouble with your Router or Extender do write us back so that we can help you accordingly.

  • In order to configure the Belkin range extender you need to follow the instructions below:
    > plug in your extender near to the router for the initial setup at least 10 feets
    > Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
    > Once you see the light stops flashing on the extender it means the extender is set up now
    Step 2
    > Connect your computer wireless to the extended network
    > pull up a browser and at the very top type in
    > You will get through the setup wizard for your Belkin Extender
    > click on get started and run the setup, Follow the instructions to complete the setup

  • Turn ON your Belkin Extender
    >connect your computer or smartphone with the extender's wifi network
    >then open the web browser and type this address:-
    >now follow the instructions and complete the setup process
    >and once the setup is complete ,we can connect wireless devices with the extender
    we can press the wps button from the extender for atleast 3 seconds and within 2 minutes press and hold the wps button from the router for 3 seconds
    and wait for the extender to reboot and once the extender is rebooted
    it means extender is configured.

Written by Esther21
Router Categories