0
William castner
how to make tplink as an access point to use it to the location far away
0 Subscribers
Submit Answer
0 Answers
In order to setup Tplink Range extender as an Access Point, all you need to do is change the mode to AP during the initial setup however in that case you would need to have an Ethernet cable from your existing router modem to the extender.
1. Login the web management page of the range extender.
2. Click Mode in the top right corner of the page. Select Access Point and click Save. The extender will reboot and switch to Access Point mode.
3. After rebooting, connect the extender to your modem or wired router via an Ethernet cable.
4. Visit http://tplinkrepeater.net, and log in with the username and password you set for the extender.
5. Go to Quick Setup to configure your extender.
Follow the steps below, here takes RE305 as demonstration:
1. Login the web management page of the range extender. If you don’t know how to do that, please refer to How to login the web management page of the range extender?
2. Click Mode in the top right corner of the page. Select Access Point and click Save. The extender will reboot and switch to Access Point mode.
3. After rebooting, connect the extender to your modem or wired router via an Ethernet cable.
4.Visit http://tplinkrepeater.net, and log in with the username and password you set for the extender.
5.Go to Quick Setup to configure your extender.
1)Configure your wireless settings and click Next.
2) Confirm the information and click Finish. Now, you can enjoy the Wi-Fi.