belkin ext

3 comments

• Set Up Your Range Extender Wirelessly
  Step 1
  Choose an outlet near the edge of your network’s Wi-Fi coverage
  Step 2
  Plug in your N600 DB Range Extender.
  Connect your computer to the “Belkin.setup” wireless network.
  Make sure nothing is plugged into your Ethernet port.
  On Windows Vista or Windows 7, please check the option
  “Connect Automatically” when you select the network.
  Step 4
  Visit “http://Belkin.range” and follow the on-screen instructions.
  Wired Setup
  Step 1: Connect the Range Extender to your computer
  using an Ethernet cable (Ethernet cable not included).
  Step 2: Plug the Range Extender into a wall
  socket or other power source.
  Step 3: On your computer, turn off Wi-Fi.
  Step 4: Use your favorite browser to visit http://Belkin.
  range and follow the instructions that appear there.
  Step 5: After your setup is complete, please turn on Wi-Fi.
  How to reset the Range Extender and get it connected if
  you change your router’s network name or password:
  Step 1: Locate the Range Extender’s reset
  button on the base of the unit.
  Step 2: With the unit still powered on, press and hold
  the Range Extender’s reset button for 10 seconds.
  Step 3: Connect your computer to the “Belkin.setup” wireless
  network. Make sure nothing is plugged into your Ethernet port.
  Step 4: In your Internet browser, open the address “http://
  Belkin.range” and follow the on-screen instructions.

  Reply

• Make sure you have existing WiFi network and its wireless router’s network name (SSID) and wireless password.
  Plug in the Belkin near to the router to configure it properly.
  On your wireless computer look for the name belkin.setup wifi list and connect.
  Now in the browser at the very top type the website belkin.range and press Enter.
  You get the Get Started page click on it and choose for the network you want to extend
  Click Refresh if your network is not on the list.
  Then put the network password and press next.Wait till it is connecting.
  Wait for the setup to authenticate your password.
  Review the Extended Network information.Press Edit if you want to change something or else Click Create Extended Network to procced.
  Extender is configured now. You will see your network settings on the screen.
  Now you can place it where ever you want.

  Thank You

  Reply

• Plug in your range extender into a power outlet that is within the range of your router’s wireless network.
  Using your Wi-Fi-capable device, locate and connect to the Belkin.setup network.
  Wait for your device to connect to the Belkin.setup network before proceeding to the next step.
  Launch a browser and enter “http://belkin.range” in the Address bar then tap Go.
  On the page that opens, tap on Get Started.
  Wait for the setup to connect to the network.
  When prompted, enter your wireless network’s password then tap Next.
  Wait for the setup to authenticate your password.
  If you have a dual-band network, select the second wireless network you want to extend then repeat
  If you are using a single-band Belkin Wi-Fi Range Extender, it will only detect the 2.4 GHz band.
  Review the Extended Network information. Tap Edit if the information needs to be changed. Otherwise, tap the Create Extended Network button to proceed with the setup.
  Your extender is now configured. You will see your network settings on the screen, and you will have the option to print the information when needed.

  Reply