How to set up linksys router ?

Hoa Minh Dao
Jul 16, 2018 08:35 AM 0 Answers
Member Since Jul 2018
Subscribed Subscribe Not subscribe
0 Subscribers
Submit Answer
Please login to submit answer.
0 Answers
Sort By:

Leave a reply

  • To setup the Linksys Router
    Firstly connect your modem to the internet port of the Linksys router and also your computer to any of the four LAN ports.
    Then check for the Led lights are lit on the router and then proceed with the connection.
    On the computer open up a web browser and type the ip address to have the startup page come up.
    Leave the username empty and type Admin in the password.Click setup and then Mac Address Clone.
    You have to enable the MAC Address Clone feature. This will allow your ISP to recognize the router as the computer with the registered MAC Address.Select Enabled and click on Clone my Pc’s Mac and click Save Settings.
    Once the MAC Address Clone feature is enabled,check the Internet status should be active.
    For checking the internet connection click on the Status Tab and check if the id address is available
    If there is then click on Release and then Renew ip address.

    Now the internet will be working You can connect your wireless devices now.

    Thank You


  • In order to set up your Linksys router follow the steps given below:
    > Connect a cable from your modem’s LAN port to the internet port of the router
    > Connect your computer wireless to the routers default SSID or via Ethernet cable
    > Pull up a browser and at the top on the address bar type in or and hit enter
    > you will come through your router login screen default username: admin and Password: admin
    > setup page will come up, Follow the instruction to complete the setup


Written by Hoa Minh Dao
Router Categories