0
Carolyn Rutledge
hvaing issuewhile setting up showing connected no internet
0 Subscribers
Submit Answer
0 Answers
This means the TPLink Router is ready to setup.
From here, connect router using Ethernet cable then go to web browser and type http://192.168.1.1 or http://192.168.0.1 or http://tplinkwifi.net . It will take you to the setup page and from here, you can add a password to secure it.
If you still face some trouble, feel free to call toll free 1800 810 8012
In order to set up your TP-Link router follow the steps given below:
> Connect a cable from your modem’s LAN port to the internet port of the router
> Connect your computer wireless to the routers default SSID or via Ethernet cable
> Pull up a browser and at the top on the address bar type in 192.168.0.1 and hit enter
> you will come through your router login screen default username: admin and Password: admin
> setup page will come up, Follow the instruction to complete the setup
Note: It should be Dynamic Ip and do not clone the MAC of the computer.