0
LARRY Boudreau
0 Subscribers
Submit Answer
1 Answers
Best Answer
0
Plugin the extender into the wall socket and make sure it is in the at least 5 feet range from the main router for the initial setup.now press and hold the WPS button on the router for 5 seconds and then within 1-minute press and hold the WPS button on the extender for 3 seconds and now with the help of any laptop or computer connect to the extender wifi and then open the browser.in the long address bar of your browser type the IP address of the extender and it will open the login dashboard, fill in the login detailsonce you are logged setup the security password and save the settings.
Replying as
Submit
In order to configure the range extender you need to follow the instructions below:
> plug in your extender near to the router for the initial setup within 10 feets
> Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
> Once you see the light stopped flashing on the extender it means the extender is set up now
Step 2
> Connect your computer wireless to the extended network
> pull up the browser and at the very top type in 192.168.0.254
> You will get through a login window default username: admin and the Password: admin
> click on quick setup and Continue, Follow the instructions to complete the setup
There is the following steps to configure the tp-link repeater( ac1750)-
Step-1 Plug in your tp-link repeater near to your router for the initial setup
Step-2 Now you need to press the WPS button on the router for 2-3 seconds on the router and then the same on the extender
Step-3 Now you can see the flashing light stopped on the tp-link extender
Step-4 Now connect your computer wireless to the extender network
Step-5 You can open the browser and type https:// tplinkrepeater.net or 192.168.0.254
Step-6 Login page appear up on the screen the type username: admin and password is admin
Step-7 Now click on the Quick setup and then continue
Now you can see the tp-link repeater is setup
There are the following steps to configure the tp-link repeater( ac1750):
Step-1 Plug in your tp-link repeater near to your router for the initial setup.
Step-2 Now you need to press the WPS button on the router for 2-3 seconds on the router and then the same on the extender within a time period of 1 minutes.
Step-3 Now you can see the flashing light stopped on the tp-link extender
Step-4 Now connect your computer wireless to the extender network or with the ethernet cable to the LAN port.
Step-5 You can open the browser and type tplinkrepeater.net or 192.168.0.254
Step-6Setup Page Wil appear You Need To Follow The Recommended Setup after finishing unplug it from the wall wait for 30seconds and plug it back again now you can connect and enjoy.
To setup Tplink AC1750 range extender follow these steps:-
>Plugin the range extender into the wall socket near to your home router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
>Connect any of your wireless device with tplink extender wireless network.
>Open any browser and in the address bar type 192.168.1.254 or 192.168.0.254 or http://tplinkrepeater.net
>Now you will see the setup wizard in the page, follow the instructions to setup the range extender
>If you want you can change the name of extended network and password of your choice that you want for it.