0
haley mason
How to setup a Linksys Router EA9200 and an Extender Re4100W Linksys ?
0 Subscribers
Submit Answer
0 Answers
In order to setup your Linksys EA9200 router follow the steps given below:
> Connect a cable from your modem’s LAN port to the internet port of the router
> Connect your computer wireless to the routers default SSID or via Ethernet cable
> Pull up a browser and at the top on the address bar type in 192.168.1.1 or https://www.linksyssmartwifi.com and hit enter
> you will come through your router login screen default username: admin and Password: admin
> setup page will come up, Follow the instruction to complete the setup
In order to setup the RE4100w Range extender you would need to follow the following steps:
Step 1
> First connect your computer wireless or wired to the range extender
> login to extender.linksys.com or 192.168.1.1
> initiate the setup.
Step 2
> Press the WPS button on the router first for 3 seconds and then on the extender for 3 seconds once the light on the extender stops blinking the setup is complete.
First to Setup Router Linksys EA9200.
1) Connect an Ethernet cable from your modem to the internet port Of Router.
2)Connect another Ethernet cable to your computer coming from the LAN port of the router.
3)Now Type “linksyssmartwifi.com” You Will Get to the setup page Follow The Recommended Instruction and at the end click finish you will see the setting page of the router.
Now To Setup Extender RE4100w Range extender you would need to follow the following steps:
1) First connect your computer wireless with wifi of linksys extender or wired to the range extender to the lan ports.
2) login to extender.linksys.com or 192.168.1.1.
3) initiate the setup.
Step 2
4) Press the WPS button on the router first for 3 seconds and then on the extender for 3 seconds within the time period of one minute once the light on the extender stops blinking the setup is complete.