0
Alejandro Vargas
I'm not able to setup my new linksys EA 6350 with my old linksys router.
0 Subscribers
Submit Answer
1 Answers
Best Answer
0
- In order to configure the New Linksys router with the older one, we have to make some changes to the New router and for that connect an Ethernet cable from the Lan port of the New router to the computer.
- Then after that, open your browser and type the Ip address of the New router
- it will take you to the setup page of the new router, follow the instructions on the screen and complete the basic steps and then login into the router settings
- once you are logged in, then go to the Lan settings and change the Ip address(for example:- If your older router’s DHCP range is from 192.168.1.2 to 192.168.1.100 then on the new router, you can change the Ip address to 192.168.1.101) and then Disable the DHCP Server.
- once you are done with that, then Connect the Ethernet cable between your older router and the new router(make sure that cable should be connected to the Lan to Lan)
- And after that restart your both the routers and then it will be good to go.
Replying as
Submit
You need to do cascading with your router.Go through this link ( http://routerloginsupport.com/question/i-need-help-in-cascading-two-routers-can-you-help-please/#comments )
To install your Linksys EA 6350 router:
1. If replacing an existing router disconnect it.
2. Power on your new router.
3. Connect the Internet cable from your modem to the yellow Internet port
on your router. Wait until the power light on the front of the router is
solid.
4. Connect to the secure wireless name shown on the sticker at the bottom / back of the router.
5. Open any web browser on your computer/ laptop or any wireless device.
6. Enter linksyssmartwifi.com in the browser’s address bar
and follow the instructions to complete your router’s setup.
7. At the end of setup, follow the on-screen instructions to set up your
Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to easily manage
your router’s settings, such as:
• Change your router’s name and password
• Set up guest access
• Configure parental controls
• Connect devices to your network
• Test your Internet connection speed
For further information contact us on 1-800-603-4024 and ask for RAY Ext. 131
or vissit us at:- ROUTERLOGINSUPPORT.com
To setup your Linksys ea 6350 router you need to follow these steps:-
You need to plug in a cable from your existing modem to internet port of your router.
after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
1. Press windows + R key that will open run window for you.
2. Type CMD in the run box.
3. Open Ipconfig and check network statistics.
4. Open your default gateway in any browser.
5. Type your user name and password .
6. that will open a setup wizard for you so follow the steps and you are good to go.
7. while following the setup wizard kindly make sure the settings you are choosing is correct
i.e time zone and wireless network name and key.
8. kindly upgrade the router firmware as well if there is any update pending over there.
if problem still persists you can reset your router and follow the same steps.
For any help feel free to call us back on 1-800-603-4024.