0
alstacey gambnlin
How to do Tplink Router setup?
got power outage
0 Subscribers
Submit Answer
0 Answers
You can follow these steps to setup your Tplink Archer A2300 router:-
>Press the reset button of the router for 30 seconds while it’s powered on.
>Now you need to wait for the router lights to get stable.
>Once the lights get stable connect any one of your wireless or wired devices with your router and do the setup process again by following the instructions given in steps.
>After completion of setup reboot your router and then after the lights get stable try to go online so that we come to know router setup done correctly.
If you still face any issues, do write us back so that we can help you with that.
>Once router lights get solid connect your devices to the router network and try to go online so that we can check that setup done successfully.
In order to setup your tplink router follow the steps given below:
> Connect a cable from your modem’s LAN port to the internet port of the router
> Connect your computer wireless to the routers default SSID or via Ethernet cable
> Pull up a browser and at the top on the address bar type in 192.168.0.1 and hit enter
> you will come through your router login screen default username : admin and Password : admin
> setup page will come up , Follow the instruction to complete the setup
Note : It should be Dynamic IP and do not clone the MAC of the computer.
In order to setup your tplink router follow the steps given below:
> Connect a cable from your modem’s LAN port to the internet port of the router
> Connect your computer wireless to the routers default Network name (SSID) or via Ethernet cable
> Pull up a browser and at the top on the address bar type in 192.168.0.1 and hit enter
> you will come through your router login screen default username : admin and Password : admin
> setup page will come up , Follow the instruction to complete the setup
Note : It should be Dynamic IP and do not clone the MAC of the computer.