Leave a reply

3 comments
  • In this case, you need to follow below-mentioned steps-
    >first of all if you made any changes on it you need to reset your Belkin Range Extender by pressing the Reset button for 20 seconds(while it’s powered on).
    >Once the Extender lights stop flashing then you can easily reconfigure it simply by performing WPS Method on it.
    > To do WPS process you need to press the WPS button of your home router for 3 seconds and then within 1 minute, you need to press the same WPS button of your Belkin Extender for 3 seconds.
    > Once you find that the lights of the extender are solid/stable, you can connect to its network using the router’s WiFi password with any of your wireless devices and then try to go online so that you come to know its working fine.
    *If you still face any kind of trouble with your Router or Extender do write us back so that we can help you accordingly.

  • In order to configure the range extender you need to follow the instructions below:
    > plug in your extender near to the router for the initial setup within 10 feets
    > Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
    > Once you see the light stopped flashing on the extender it means the extender is setup now
    Step 2
    > Connect your computer wireless to the extended network
    > pull up browser and at the very top type in 192.168.2.1
    > You will get through a login window default username: admin and the Password : admin
    > click on quick setup and Continue , Follow the instructions to complete the setup

  • For new Belkin n300 Range Extender.

    Just press the WPS button on your router/modem first for 1-2 seconds, then press the WPS button on Belkin n300 Range Extender for 3-5 seconds.

    Now wait for 2 minutes.
    The difference in light color and pattern will confirm its connection.

    For Used/ Old Belkin n300 Range Extender:
    Plug in to Power Socket and wait for 1 minute.
    If its an used Belkin n300 Range Extender, then first Reset it using a paper clip to press the Reset Button in a tiny hole for 30 seconds.

    Now its brand new, or by default one.

    Wait for 2 minutes after reset then proceed further as setup New Extender.

    Its now extending your home network with same password as of your home wifi.

    Note:
    1. During setup, make sure that the Belkin n300 Range Extender is placed within 7-10 feet at the time of setup, or in the same room.
    2. Two minutes patience is the critical part that will make the difference between success and failure in Setup.
    3. Best of luck

Written by DAVID LYONS
Router Categories