Leave a reply

3 comments
  • You can follow these steps to setup your Tplink Range Extender:-
    >Plugin Tplink range extender into the wall socket nearby to your home router for the initial setup.
    >Press the WPS button on your extender and hold it down for 3-5 seconds.
    >Within the 1 minute press WPS button on your home router.
    >Wait for the extender lights get stable and now try to connect any of your wireless devices with extended network.
    *If you want to connect your range extender with 5GHz network then repeat the same steps once again.

  • Plug your extender into a power socket.
    You need to reset the extender so hold the reset button on extender for 15 seconds and release it.
    1- Connect your device to extender’s network.
    2- Open your Browser.
    3- Type https://tplinkrepeater.net or 192.168.0.250 / 192.168.0.254 in address bar
    4-Login to the extender page by entering the username and password as “admin’.
    5-Now complete the set up with the help of set up wizard.

  • In order to configure the range extender you need to follow the instructions below:
    > plug in your extender near to the router for the initial setup within 10 feets
    > Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
    > Once you see the light stopped flashing on the extender it means the extender is setup now
    Step 2
    > Connect your computer wireless to the extended network
    > pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
    > You will get through a login window default username: admin and the Password : admin
    > click on quick setup and Continue , Follow the instructions to complete the setup

Written by christian123
Router Categories