Leave a reply

  • In this case, you need to follow below-mentioned steps-
    >first of all if you made any changes on it you need to reset your Belkin Range Extender by pressing the Reset button for 20 seconds(while it’s powered on).
    >Once the Extender lights stops flashing then you can easily reconfigure it simply by performing WPS Method on it.
    > To do WPS process you need to press the WPS button of your home router for 3 seconds and then within 1 minute, you need to press the same WPS button of your Belkin Extender for 3 seconds.
    > Once you find that the lights of the extender are solid/stable, you can connect to its network using the router’s wifi password with any of your wireless devices and then try to go online so that you come to know its working fine.
    *If you still face any kind of trouble with your Router or Extender do write us back so that we can help you accordingly.

  • In order to configure the range extender you need to follow the instructions below:
    > plug in your extender near to the router for the initial setup within 10 feets
    > Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
    > Once you see the light stopped flashing on the extender it means the extender is setup now
    Step 2
    > Connect your computer wireless to the extended network
    > pull up browser and at the very top type in
    > You will get through a login window default username: admin and the Password : admin
    > click on quick setup and Continue , Follow the instructions to complete the setup

Written by luke
Router Categories