0
john buschini
How to setup an amped extender?
0 Subscribers
Submit Answer
0 Answers
You need to connect your Computer on the amped wireless .
Then pull up the browser and type in default ip address of your amped extender . i.e 192.168.1.240
Then scan for the available networks and enter the password of your wifi.
Assign the name and password for your extended wireless settings.
Then finish the set up process and reconnect on your new extenders wifi and and you are ready to go know.
To setup amped range extender follow these steps:-
>Plugin the amped range extender near to your home router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 20 seconds.
>Connect any of your wireless device with amped wireless network.
>Open any browser and in the address bar type 192.168.1.240 or http://setup.ampedwireless.com
>Now you will see the SCAN button on the page, click on it and after that it will scan the wireless networks nearby to it.
>From the list select network that you want to extend and then enter password for the same.
>In the next step if you want you can change the name of extended network and password of your choice that you want for it.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid connect your devices to the extended network and thry to go online so that we can check that extender setup done successfully.
In order to setup a range extender follow the below given steps:
> Plug in the router to a wall outlet directly
> Connect your computer to the wifi of your extender to the default SSID or the network name
> Pull up a browser and at the top type in 192.168.1.240
> you will see a scan button click on that
> look for your existing network select that eneter the password
> click on next it will take at least 2 -3 minutes to complete the setup once itts done it will ask you to connect your devices to the extended network.
> Setup is Complete