Leave a reply

2 comments
  • In order to configure the range extender you need to follow the instructions below:
    > plug in your extender near to the router for the initial setup within 10 feets
    > Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
    > Once you see the light stopped flashing on the extender it means the extender is setup now
    Step 2
    > Connect your computer wireless to the extended network
    > pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
    > You will get through a login window default username: admin and the Password : admin
    > click on quick setup and Continue , Follow the instructions to complete the setup

  • You can follow these steps to setup your Tplink RE200 Range Extender –
    >Plugin range extender into the wall socket nearby to your home router for the initial setup.
    >Press the reset button for 10 seconds, you can find it at the downside near to Ethernet port.
    >once the lights stop flashing press the WPS button on your extender and hold it down for 3-5 seconds.
    >Within the same time press WPS button on your home router.
    >Wait for the extender lights get stable and now try to connect any of your wireless devices with the extended network.
    *If you want to connect your range extender with 5GHz network then repeat the same step once again.

Written by marthahucks
Router Categories