Leave a reply

2 comments
  • To configure your Archer C 59 router kindly follow these steps:-
    You need to plug in a cable from your existing modem to internet port of your router.
    after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
    1. Press windows + R key that will open run window for you.
    2. Type CMD in the run box.
    3. Open Ipconfig and check network statistics.
    4. Open your default gateway in any browser.
    5. Type your user name and password .
    6. that will open a setup wizard for you so follow the steps and you are good to go.
    if problem still persists you can reset your router and follow the same steps.
    For any help feel free to call us back on 1-800-603-4024.



    0



  • In order to setup your tplink router follow the steps given below:
    > Connect a cable from your modem’s LAN port to the internet port of the router
    > Connect your computer wireless to the routers default SSID or via Ethernet cable
    > Pull up a browser and at the top on the address bar type in 192.168.0.1 and hit enter
    > you will come through your router login screen default username : admin and Password : admin
    > setup page will come up , Follow the instruction to complete the setup
    Note : It should be Dynamic Ip and do not clone the MAC of the computer.



    0



Written by MORGAN
Router Categories