Leave a reply

3 comments
  • – Plug the extender near to your router.
    – Use direct socket no surge protector.
    – Press WPS button on your router for 4 seconds.
    – Do the same with your range extender.
    – Wait for 3-4 minutes.
    – Now you can see host wireless name with _EXT.
    – Connect to it using host network password.
    – Once connected try going online and if it didn’t work try hard reset.
    – Hard Reset- Press and hold the reset button for seconds.



    0



  • If you are facing connectivity issues with Linksys extender re 3000 kindly check few things:-
    1. signal strength from your router to extender.
    2. change location of your extender.
    3. extender should be directly plugged into a wall socket.
    4. extender should be properly configured.
    if problem still persists kindly reset your extender with the help of a paper clip and re setup your device by following these steps:-
    1.Plug your Range Extender into a power outlet near your main Router.
    2.Push the WPS button on your main Router first, then immediately push the WPS button on your Range Extender.
    3. After you have pushed WPS button of your Router, you need to push WPS button of your Range Extender within 2 minutes. .
    4.After pushing the WPS button of your Router, your Router WPS LED should blink. If your Router WPS LED doesn’t blink, it means you need to push the WPS button again until the WPS LED of your Router blinks. The same reason is also suitable for RE product. After pushing the WPS button of your Range Extender, the WPS light of your Range Extender should blink. If not, push again.
    5.The WPS process will last 2 minutes. You can wait 2 minutes, and then check the wireless signal LED of your Range Extender.
    5. After 2 minutes, if the wireless signal LED of your Range Extender is still off, it means the WPS process fails. You may need to try one more or several more times of WPS operation, and repeat the steps above.
    6. At last, you can put your Range Extender in a proper place where you want to extend the wireless network’s coverage, and enjoy the extended wireless network. No need to repeat the process. Once it’s done, it will connect automatically every time you plug it back in.
    For any help feel free to call us back on 1-800-603-4024.



    0



  • If the Linksys Extender is not working , try to do the following steps:
    > First try to reset theExtender , Press and hold the reset button down for 30 seconds
    > Wait for at least 2 minutes the let the Extender boot up and then try to configure the Extender again manually
    >if still the Extender is not working
    > press and hold the reset button down for 30 seconds.
    > While holding the reset button unplug the Extender from the power and keep holding the reset button, wait for 30 seconds
    > Plug in the Extender back to the power while holding the reset button and wait for 30 seconds and then release the reset button.
    > Once the extender is up then follow the steps below to re-setup the extender:
    Step 1
    > plug in your extender near to the router for the initial setup within 10 feets
    > Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
    > Once you see the light stopped flashing on the extender it means the extender is setup now
    Step 2
    > Connect your computer wireless to the extended network
    > pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
    > You will get through a login window default username: admin and the Password : admin
    > click on quick setup and Continue , Follow the instructions to complete the setup



    0



Written by diana h
Router Categories