Leave a reply

4 comments
  • In Order to update the firmware of the router R 7000 Netgear Night Hawk Router Please follow the instruction Below:
    > Connect your Computer to the router Wireless or via Ethernet cable
    > Pull up a browser on the computer and at the very top on the address bar type in 192.168.1.1 or http://www.routerlogin.net and then hit enter.
    > A screen will appear and it will ask you for the default name and password, the default username: admin and the Password: password or if you have changed it during the setup enter the credentials.
    > you will be logged in into the netgear genie dashboard of the router
    > on the top you will see “a new firmware for the router is available” click on that it will show up a file to update, click on yes and wait. The router firmware will be updated.



    0



  • 1. Make sure you are connected to your router to access routerlogin.net or router login page.
    2. You can use Ethernet cable from router to PC or wirelessly connect to the router.
    3. Once connected open your browser.
    4. Now in the address bar type http://www.routerlogin.net.
    5. You can also use IP address – 192.168.1.1
    6. The login screen will appear.
    7. Use Default – username-admin / password-password
    8. Updates will flash on the screen.
    9. Click on it and follow instructions to complete the firmware update.
    10. Note- Make sure when you update your router try Ethernet connection first.



    0



  • To Update the firmware of the router R 7000 Netgear Please follow these steps :-
    1. Firstly you use an Ethernet cable to connect your computer to your router to update the firmware.
    2. Open your any Browser on the computer and at the very top on the address bar Type in 192.168.1.1 or http://www.routerlogin.net and then hit enter.
    3. The screen will appear with the router user name and password.
    4. The user name is ( admin ) , and the default password is ( password ).
    5. You will be logged in into the Netgear genie dashboard .
    6. You will see a new firmware for the router is available on the top of the screen .
    7. click on it. you will see file to update . Click on yes Button , wait few seconds and The router firmware will be updated.



    0



  • Connect your computer with router and launch any internet browser using interface http://www.routerlogin.net or 192.168.1.1
    Log into router dashboard with and once you logged in it will you give you the prompt for firmware upgrade.
    Click on that link and upgrade the firmware of your router .



    0



Written by Sherry hunton
Router Categories