Leave a reply

3 comments
  • Well in this scenario you need to hard reset your router for 30-30-30 seconds.
    Connect back your router to the power outlet and wait for the lights and then afterwards check the wireless signals and make sure your router is in the default settings.
    Your router will definitely gonna work now .



    0



  • – Reset the router first
    – Press and hold the reset button for 10 -12 seconds.
    – Now, setup it again.
    – Connect an ethernet cable from modem to router’s internet port.
    – Use another ethernet cable from the router to PC.
    – Open your browser.
    – Type in the address bar 192.168.1.1 or http://www.linksyssmartwifi.com.
    – Accept the agreement and start the setup.
    – Follow the instructions for manual setup.



    0



  • In this case please follow the instructions below:
    > Please hard reset the linksys Router
    > press and hold the reset button down for 20-30 seconds and wait until the router is back on
    > Connect a cable from your modem’s LAN port to the internet port of the router
    > Connect your computer wireless to the routers default SSID or via Ethernet cable
    > Pull up a browser and at the top on the address bar type in 192.168.1.1 or https://www.linksyssmartwifi.com and hit enter
    > you will come through your router login screen default username : admin and Password : admin
    > setup page will come up , Follow the instruction to complete the setup



    0



Written by Carlos Pelaez
Router Categories