Leave a reply

3 comments
  • Follow these steps to setup TP-link Range Extender-
    >Plugin your range extender into a power socket near to your home router/Main Router.
    > Press the WPS button of your router for 5 seconds and at the same time press the WPS button of your range extender for same 5 seconds as well.
    >Once the range extender and router lights are Solid (if not then you need to try above steps one more time), place the range extender at the place where you want it and you are good to go.
    *Still having the issue with your range extender, let us know so that we can help accordingly.



    0



  • Plug your extender into a power socket. Avoid surge protector / Extensions!
    You need to reset the extender so hold the reset button on extender for 25 seconds and release it.
    1- Connect your device to extender’s network.
    2- Open your Browser.
    3- Type http://tplinkrepeater.net or 192.168.0.250 / 192.168.0.254 in address bar.
    4- You need to log in now with default login:-Username-admin /Password-admin.
    5- Setup wizard will guide you through the setup.



    0



  • In order to configure the range extender you need to follow the instructions below:
    > plug in your extender near to the router for the initial setup within 10 feets
    > Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
    > Once you see the light stopped flashing on the extender it means the extender is setup now
    Step 2
    > Connect your computer wireless to the extended network
    > pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
    > You will get through a login window default username: admin and the Password : admin
    > click on quick setup and Continue , Follow the instructions to complete the setup



    0



Written by Charles Hamm
Router Categories