0
travis123
How to setup a Tplink AC1900 Router ?
0 Subscribers
Submit Answer
0 Answers
– Connect your computer to Tplink router using ethernet cable from router’s LAN port to PC ethernet port.
– Now open your browser.
– In the address bar type 192.168.0.1 and enter.
– The login page will appear.
– Use admin to access the dashboard and make sure you write each information while setup.
You need to connect the internet cable from your modem to the tp link router in the internet port.
Now connect another cable from any port {no-1,2,3,4} to the computer on which we are working.
Now open the browser and type in the address bar default ip address of your tp link i.e 19.168.0.1
Now create a new username and password to login to the router settings .
GO according to the instructions given and your router set up is complete.
In order to setup your tplink router follow the steps given below:
> Connect a cable from your modem’s LAN port to the internet port of the router
> Connect your computer wireless to the routers default SSID or via Ethernet cable
> Pull up a browser and at the top on the address bar type in 192.168.0.1 and hit enter
> you will come through your router login screen default username : admin and Password : admin
> setup page will come up , Follow the instruction to complete the setup
Note : It should be Dynamic Ip and do not clone the MAC of the computer.