Leave a reply

4 comments
  • – Simply use https://192.168.1.240 and you can setup the amped range extender.
    – Try resetting the extender before setup.
    – Press and hold the reset button for 10-12 seconds.
    – Before setup make sure you are connected to your range extender. Wired or wireless.



    0



  • To set up the Amped range extender follow these steps-
    – Plug in the range extender near to your home router
    -Once the extender lights get solid connect your device to extender’s wifi network starting from Amped__.
    -Open the browser and type http://192.168.1.240 or http://setup.ampedwireless.com in the address bar.
    -You should see the Dashboard and here you can follow the instructions to connect your Extender to the home router.
    -Once the setup is done try to connect your devices with extender and also try to go online.
    You can also put your any kind of queries related to Router or Extender by replying us back.



    0



  • You need to connect your Computer on the amped wireless .
    Then pull up the browser and type in default ip address of your amped extender . i.e 192.168.1.240
    Then scan for the available networks and enter the password of your wifi.
    Assign the name and password for your extended wireless settings.
    Then finish the set up process and reconnect on your new extenders wifi and and you are ready to go know.



    0



  • In order to setup a Amped Extender REC10 Please follow the instructions below:
    > plug in your extender near to the Router for the primary setup
    > Connect your computer wireless to the Extended Wifi
    > Pull a browser on the computer and on the very top on the address bar type in 192.168.1.240 hit enter
    > Create your username and password and then follow the instructions to complete the setup.



    0



Written by Doug Wellington
Router Categories