0
rvak3939
ac1200
0 Subscribers
Submit Answer
0 Answers
To setup your Tp link extender kindly follow these steps:-
1.Plug your Range Extender into a power outlet near your main Router.
2.Push the WPS button on your main Router first, then immediately push the WPS button on your Range Extender.
3. After you have pushed WPS button of your Router, you need to push WPS button of your Range Extender within 2 minutes. .
4.After pushing the WPS button of your Router, your Router WPS LED should blink. If your Router WPS LED doesn’t blink, it means you need to push the WPS button again until the WPS LED of your Router blinks. The same reason is also suitable for RE product. After pushing the WPS button of your Range Extender, the WPS light of your Range Extender should blink. If not, push again.
5.The WPS process will last 2 minutes. You can wait 2 minutes, and then check the wireless signal LED of your Range Extender.
5. After 2 minutes, if the wireless signal LED of your Range Extender is still off, it means the WPS process fails. You may need to try one more or several more times of WPS operation, and repeat the steps above.
6. At last, you can put your Range Extender in a proper place where you want to extend the wireless network’s coverage, and enjoy the extended wireless network. No need to repeat the process. Once it’s done, it will connect automatically every time you plug it back in.
For any help feel free to call us back on 1-800-603-4024.
Press the wps button on your router and extender at the same time.
Now once the light on your extender is solid blue from blinking it means your extender is connected .
You will see the name of your extender same as of your router but with ext affixed in it.
Now open the extender page and made the necessary changes according to yourself.
Plug your extender into a power socket. Avoid surge protector / Extensions!
You need to reset the extender so hold the reset button on extender for 25 seconds and release it.
1- Connect your device to extender’s network.
2- Open your Browser.
3- Type http://tplinkrepeater.net or 192.168.0.250 / 192.168.0.254 in address bar.
4- You need to log in now with default login:-Username-admin /Password-admin.
5- Setup wizard will guide you through the setup.
In order to configure the range extender you need to follow the instructions below:
> plug in your extender near to the router for the initial setup within 10 feets
> Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
> Once you see the light stopped flashing on the extender it means the extender is setup now
Step 2
> Connect your computer wireless to the extended network
> pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
> You will get through a login window default username: admin and the Password : admin
> click on quick setup and Continue , Follow the instructions to complete the setup