Leave a reply

3 comments
  • To Setup Linksys 4100w re through ethernet cable kindly follow these steps:-
    1.Connect one end of an Ethernet cable to a port at the back of the Linksys RE4100W then connect the other end to your computer.
    2.Open a web browser on your computer and access the Linksys RE4100W’s web-based setup page by entering 192.168.1.1 in the Address bar.
    3.Once you have accessed the Linksys RE4100W’s web-based setup page, follow the on-screen instructions. After successfully connecting to your router’s wireless network, you will see a confirmation message. Click Close.
    For any help feel free to call us back on 1-800-603-4024.



    0



  • Steps to setup your Linksys 4100W RE –
    1.To do a quick and fast setup just connect your extender to the wall socket.
    2.Connect an Ethernet cable from LAN port of your extender to your computer.
    3.Connect your computer to extender’s network. (Linksys_Extender setup)
    4.Open your browser and type http://extender.linksys.com or type 192.168.1.1.
    5.Step wizard will appear and just click on start and follow the steps to complete the setup.



    0



  • In order to setup your Tplink Router using a Ethernet cable , please follow the instruction given below:
    > Plug in your extender near to your computer
    > Connect a ethernet cable between the LAN port of the extender and computer
    > pull up a browser and at the top on the address bar type in 192.168.1.1 and hit enter
    > you will get to the setup wizard for the extender follow the instruction on the screen
    > Complete the setup once you see a prompt on the screen telling you that the setup is complete remove the cable from the extender and the computer
    > connect your devices wireless to the extended network.
    the setup is complete



    0



Written by bravehorse
Router Categories