Leave a reply

  • Hi, Setting up a password for the Dlink Dap 1620 wifi is not at all difficult . all you need to make sure is that the computer is connected to the Dlink wireless to the open network.
    then pull up a browser and at the top on the address bar type in and hit enter this will bring up the dashboard of your Dlink dap on the bottom right side you will see the wireless settings.
    click on the wireless settings and then you will see the SSID or the network name where you can change the name of the WIFI if you want to or else right under it you will see the security option the mode will be WPA2 AES and then you can enter the new password on it and then save the settings. once its done try an disconnect the computer to the name and the password and make sure not to keep exactly the same name for both 2.4 and 5GHz band wifi name it has to be diffrent something like XYZ and XYZ_5G.
    Thank you

  • To secure your Dap 1620 kindly follow these steps:-
    1.Change Your extender Admin Username and Password.
    2.Change the Network Name.
    3.Activate Encryption.
    4.Double Up on Firewalls.
    5.Turn Off Guest Networks.
    6.Update Router Firmware.
    7.Turn Off WPS.
    8.Disable DHCP.
    9.Filter on MAC Addresses.
    For any help feel free to call us back on 1-800-603-4024.

Written by lisa gerrard
Router Categories