Leave a reply

5 comments
  • In order to configure the range extender you need to follow the instructions below:
    > plug in your extender near to the router for the initial setup within 10 feets
    > Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
    > Once you see the light stopped flashing on the extender it means the extender is setup now
    Step 2
    > Connect your computer wireless to the extended network
    > pull up browser and at the very top type in 192.168.0.254 or 192.168.1.254
    > You will get through a login window default username: admin and the Password : admin
    > click on quick setup and Continue , Follow the instructions to complete the setup



    0



  • Plug your TL-WA850RE into a power outlet near your wireless router or AP.
    Use an Ethernet cable to connect your TL-WA850RE to your PC.
    Log into the Range extender by typing http://tplinkrepeater.net or http://192.168.0.254 in the address bar of the web browser (such as Internet Explorer, Google chrome). A little window will pop out and ask you for the username and password. The Username and Password are both admin in lower case by default.
    Follow the Quick Setup, and click “Next” to continue.
    Select your Region here, and then click “Next”.
    Now your TL-WA850RE will scan all the wireless networks around.
    Then please choose the wireless network you want to extend, click “Next”.
    Now input the password of the wireless network you want to extend, and click “Next”.
    Here we can review all the settings we made just now, click “Finish” if it’s ok.



    0



  • – Connect to your extender wireless or hardwired.
    – Open your browser.
    – In the address bar type 192.168.0.254/250 and enter.
    – Login with admin credentials.
    – The setup wizard will run.
    – Follow the instruction and complete the setup.



    0



  • Press the wps button on your router and extender at the same time.
    Now once the light on your extender is solid blue from blinking it means your extender is connected .
    You will see the name of your extender same as of your router but with ext affixed in it.
    Now open the extender page and made the necessary changes according to yourself.



    0



  • To setup your Tp link Wa 855 Re extender kindly follow these steps:-
    1.Plug your Range Extender into a power outlet near your main Router.
    2.Push the WPS button on your main Router first, then immediately push the WPS button on your Range Extender.
    3. After you have pushed WPS button of your Router, you need to push WPS button of your Range Extender within 2 minutes. .
    4.After pushing the WPS button of your Router, your Router WPS LED should blink. If your Router WPS LED doesn’t blink, it means you need to push the WPS button again until the WPS LED of your Router blinks. The same reason is also suitable for RE product. After pushing the WPS button of your Range Extender, the WPS light of your Range Extender should blink. If not, push again.
    5.The WPS process will last 2 minutes. You can wait 2 minutes, and then check the wireless signal LED of your Range Extender.
    5. After 2 minutes, if the wireless signal LED of your Range Extender is still off, it means the WPS process fails. You may need to try one more or several more times of WPS operation, and repeat the steps above.
    6. At last, you can put your Range Extender in a proper place where you want to extend the wireless network’s coverage, and enjoy the extended wireless network. No need to repeat the process. Once it’s done, it will connect automatically every time you plug it back in.
    For any help feel free to call us back on 1-800-603-4024.



    0



Written by msattitude46
Router Categories