Leave a reply

  • To setup Amped wireless range extender sr20000g manually kindly follow these steps:-
    1.Plug your Range Extender into a power outlet near your main Router.
    2.Push the WPS button on your main Router first, then immediately push the WPS button on your Range Extender.
    3. After you have pushed WPS button of your Router, you need to push WPS button of your Range Extender within 2 minutes. .
    4.After pushing the WPS button of your Router, your Router WPS LED should blink. If your Router WPS LED doesn’t blink, it means you need to push the WPS button again until the WPS LED of your Router blinks. The same reason is also suitable for RE product. After pushing the WPS button of your Range Extender, the WPS light of your Range Extender should blink. If not, push again.
    5.The WPS process will last 2 minutes. You can wait 2 minutes, and then check the wireless signal LED of your Range Extender.
    5. After 2 minutes, if the wireless signal LED of your Range Extender is still off, it means the WPS process fails. You may need to try one more or several more times of WPS operation, and repeat the steps above.
    6. At last, you can put your Range Extender in a proper place where you want to extend the wireless network’s coverage, and enjoy the extended wireless network. No need to repeat the process. Once it’s done, it will connect automatically every time you plug it back in.
    For any help feel free to call us back on 1-800-603-4024.

  • in order to setup a extender please follow the instruction below
    1> Plug your extender near to the router first at least 5 feets away
    2> Connect your computer to the SSID network name of your extender wifi.
    3> pull up a browser and at the top on the address bar type in
    4> Click on scan > Choose your existing network enter the password for the primary Wi-Fi and hit connect
    5> you will see a page click on clone settings and then hit next
    6> save the settings nad the extender should be up and runnig.

  • Connect your computer to the wifi of your extender to the default SSID or the network name
    Pull up a browser and at the top type in you will see a scan button click on that and look for your existing network select that and enter the network password.
    click on next it will take at least 2 -3 minutes to complete the setup once its done it will ask you to connect your devices to the extended network.
    Connect your devices and your extender is ready to use.

Written by Lynn Sibley
Router Categories