How do i activate the 5.6 band of my Amped wireless

2 comments

• It is already active you just need to configure it.
  You can connect an ethernet cable from range extender to pc.
  Open your browser and type in http://setup.ampedwireless.com.
  You can setup 5Ghz network now.
  If your router doesn’t support 5GHz your extender cannot function 5Ghz frequency.

  Reply

• Thanks for sharing your query with us, how ever to activate 5.6 ghz band on your amped wireless it is mandatory that your router should support 5.6 ghz band too. If it supports you just need to reset your extender while plugged in and re setup the device.
  1. connect your extender in a direct wall socket near by your router for setup.
  2. press wps button on your extender for 3-5 seconds.
  3. press wps button on your router (you can do it by accessing router main page also).
  4. it will be connected to your routers network.
  5. you will see your network name with ext affixed in it.
  6. connect to the same network .
  7. it will open a setup wizard for you.
  8. follow the on screen instructions and you are good to go now.
  for any question & query feel free to call us on 1-800-603-4024

  Reply